|
Product Details:
Payment & Shipping Terms:
|
| Category: | Engine Parts | Part Number: | 095-2286 0952286 |
|---|---|---|---|
| Product Name: | Fuel Priming Pump | Machine Number: | 315 315B 317B LN 318B E120 E140 E70 |
| Application: | Excavator | Lead Time: | 1-3 Days For Delivery |
| Packing: | Standard Export Carton | ||
| Highlight: | excavator fuel priming pump,3046 engine spare parts,315C excavator fuel pump |
||
095-2286 0952286 Fuel Priming Pump Excavator Spare Parts For 3046 4M40 307B 315C 317B L
Specifiion
| Category | Engine Parts |
| Name | Fuel Priming Pump |
| Parts No | 095-2286 0952286 |
| Machine Number | 315 315B 315C 317B LN 318B E120 E140 E70 E70B |
| Lead time | 1-3 DAYS |
| Quality | Brand new, OEM quality |
| MOQ | 1 PCS |
| Means of transport | By sea/air, DHL FEDEX UPS TNT |
| Packing | As request or standard packing |
| Working Principle | 1. Priming Process: When the lever/knob is pressed (downstroke), the piston compresses the fuel in the pump chamber, closing the inlet check valve and opening the outlet check valve – fuel is pushed into the fuel lines/filter housing. |
| 2. Return Stroke: Releasing the lever allows the spring to push the piston back (upstroke), creating a vacuum in the pump chamber – this opens the inlet check valve, drawing fuel from the tank into the pump. | |
| 3. Air Purge: Repeating the lever motion displaces air from the fuel lines/filter and fills them with diesel fuel; air exits via a bleed screw (on the fuel filter housing) until only fuel flows out. | |
| 4. Idle State: Once primed, the check valves keep fuel in the lines, and the piston seal prevents leakage – the engine can draw fuel normally from the tank when started. | |
| Core Functions | 1. Air Removal: Eliminates air from the fuel system (a major cause of engine hard starting or stalling) after filter replacement, fuel tank refilling, or fuel line disconnection |
| 2. Fuel Priming: Builds low pressure in the fuel lines to push diesel fuel through the filter and into the injection pump – ensures the engine has adequate fuel supply for startup | |
| 3. Leak Prevention: Check valve and piston seal prevent fuel backflow and leakage, maintaining system prime even when the engine is off | |
| 4. Emergency Operation: No electrical power needed – allows manual priming in remote locations or during electrical system failures |
EXCAVATOR 315 315B 315C 317B LN 318B E120 E140 E70 E70B
MINI HYD EXCAVATOR 307 307B 308C
TRACK LOADER 933 933C 939C
TRACK-TYPE TRACTOR D3C III D3G D4C III D4G D5C III D5G C.ater.pillar.
| 1371296 PUMP GP-GEAR |
| D3C III, D3G, D4C III, D4G, D5C III, D5G |
| 1057322 PUMP GP-MAIN HYDRAULIC |
| 315, 317 |
| 1166724 PUMP GP-WATER |
| 315, 315B, 315B FM L, 315C, 317B LN, 318B, D3C III, D3G, D4C III, D4G, D5C III, D5G |
| 1455291 PUMP GP-CHARGE |
| 939C, D4C III, D5C III |
| 1471476 PUMP GP-CHARGE |
| D4C III, D5C III |
| 1336766 PUMP GP-PISTON & GEAR |
| 315B, 315B FM L, 315B L |
| 1451077 PUMP GP-CHARGE |
| CX35-P800, D3C III, D6N, D6T, D6T LGP, D6T LGPPAT, D6T XL, TH31-E61, TH35-E81 |
| 1068263 PUMP GP-WATER |
| 933, 933C, 939, 939C, D3C III, D4C III, D5C III |
| 1375541 PUMP GP-FUEL PRIMING |
| 120G, 12G, 130G, 140G, 140H, 143H, 14G, 14H, 160G, 160H, 163H, 1673C, 16H, 235B, 24H, 3116, 311C, 311D LRR, 3126, 3126B, 3126E, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315C, 315D L,... |
| 1072473 PUMP AS-WATER |
| 3044C, 933, 933C, 939, 939C, D3C III, D4C III, D5C III |
| 7T8890 PUMP AS WASHER |
| 120M, 120M 2, 12M, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235B, 235C, 235D, 245, 245B, 245D, 311B, 311D LRR, 312, 312B L, 312C L, 312D, 312D L, ... |
| 4I1023 PUMP GP-GEAR |
| 311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN, 318B, 320 L |
| 1175033 PUMP AS-WATER |
| 315, 315B, 315C, 317B LN, 318B, D3C III, D3G, D4C III, D4G, D5C III, D5G |
| 1482950 PUMP GP-FUEL INJECTION |
| 315B L |
| 1989876 PUMP GP-WATER |
| 312C, 315B L, 554, M312, M315 |
| 1754807 PUMP & MOTOR GP |
| 1090, 1190, 1190T, 1290T, 307B, 312B L, 312C, 315B L, 315C, 317B LN, 318B, 318C, 320B, D6M, M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318C MH, M318D, M318D MH, M322C, M322D, ... |
| 1754806 PUMP & MOTOR GP-FUEL TRANSFER |
| 307, D6R, D6R II |
| 1272230 PUMP GP-FUEL INJECTION |
| M312, M315 |
| 1657606 PUMP GP-FUEL INJECTION |
| M312 |
| 2129336 PUMP AS |
| 301.5, 301.6C, 302.5, 302.5C, 303.5, 304.5 |
| 1521800 PUMP AS |
| 301.5, 302.5, 303.5, 304.5, 902, 904B, 904H, 906, 908 |
| 2010920 PUMP GP-GEAR |
| 301.5 |
| 1536876 PUMP AS-LIFT |
| 301.5, 302.5, 303.5, 304.5, 902, CB-334D, CB-335D |
| Pos. | Part No | Qty | Parts name | Comments |
| 1 | 086-2138 | [1] | PISTON | |
| 2 | 096-9013 | [4] | GASKET | |
| 3 | 095-2279 | [2] | VALVE | |
| 4 | 095-2280 | [2] | SPRING-PUMP | |
| 5 | 095-2281 | [2] | GASKET | |
| 6 | 095-2282 | [1] | SUPPORT | |
| 7 | 095-2286 | [1] | PUMP-FUEL PRIMING | |
| 8 | 095-2301 | [1] | TAPPET | |
| 9 | 095-2302 | [1] | ROLLER | |
| 10 | 095-2303 | [1] | PIN | |
| 11 | 095-2304 | [2] | BLOCK | |
| 12 | 095-2307 | [1] | PLUG | |
| 13 | 095-2309 | [1] | SCREEN | |
| 14 | 095-2310 | [1] | BOLT-SPECIAL (BANJO) | |
| 15 | 095-6978 | [1] | GASKET | |
| 16 | 095-6998 | [1] | RING | |
| 17 | 095-7033 | [1] | EYEBOLT | |
| 18 | 118-5765 | [1] | SPRING | |
| 19 | 095-7034 | [1] | FITTING | |
| 20 | 118-5757 | [1] | SEAL | |
| 21 | 096-8945 | [1] | PUSHROD |
![]()
1 Hydraulic parts: hydraulic pump, main valve, hydraulic cylinder, final drive, travel motor, swing machinery, swing motor etc.
2 Engine parts: engine ass’y, piston, piston ring, cylinder block, cylinder head, crankshaft, turbocharger, fuel injection pump, starting motor and alternator etc.
3 Undercarriage part: Track roller, Carrier roller, Track Link, Track shoe, Sprocket, Idler and Idler cushion etc.
4 Cab parts: operator’s cab, wiring harness, monitor, controller, seat, door etc.
5 Cooling parts: Radiator, air conditioner, compressor, after cooler etc.
6 Other parts: Service kit, swing circle, engine hood, swing joint, fuel tank, filter, boom, arm, bucket etc.
Packing Details :
inner packing : plastic film for wrapping
external packing : wooden
Shipping :
within 3 days after received the payment , by air or by express or by sea on the basis of the
quantity and emergency circumstances.
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperated,
2. By Air: Delivery from the Guangzhou air port to customer's destination city air port.
3. By Sea: Delivery from the Huangpu port .
Contact Person: Mr. Paul
Tel: 0086-15920526889
Fax: +86-20-89855265