logo
Home Blog

Common Komatsu Excavator Display Screen Faults and Remedies

I appreciate the help from Paul, he's prefessional and knows exactly what parts I need. My CAT has gone back to work without any problem.

—— Raphael

Got the final drive and its beautiful I think. We've have it assembled in our Hitachi ZX330 excavator, my machines goes to work again now. Many thanks

—— Kevin

Fast shippment, the arrived parts is good quality, our engine is repaired and is perfectly running at maximum power. Thank you, god bless.

—— Mohammed

I'm Online Chat Now
Company Blog
Common Komatsu Excavator Display Screen Faults and Remedies

1. Display Screen Not Turning On / Black Screen

  • Possible Causes

    • Power supply or fuse failure

    • Loose connectors or wiring issues

    • Faulty display screen

  • Remedies

    • Check fuse and power voltage

    • Inspect connectors and wiring → clean or reconnect

    • Replace the display module


2. Display Screen Flickering or Unstable Brightness

  • Possible Causes

    • Power voltage fluctuation

    • Aging of display backlight module

    • Connector oxidation or poor contact

  • Remedies

    • Measure power voltage to ensure stability

    • Inspect backlight module → repair or replace

    • Clean connectors to ensure good contact


3. Incorrect Information or Error Codes on Screen

  • Possible Causes

    • Sensor signal abnormalities (oil temperature, oil pressure, water temperature, etc.)

    • ECM/controller communication errors

    • Software or firmware issues in display screen

  • Remedies

    • Check related sensors → repair or replace faulty sensors

    • Inspect CAN bus or communication wiring → repair if needed

    • Upgrade display firmware or ECM software


4. Touch / Button Unresponsive (for Touchscreen Displays)

  • Possible Causes

    • Touchscreen damaged or dirty

    • Cable or control board fault

  • Remedies

    • Clean the screen and test touch functionality

    • Check touchscreen ribbon cable and control board → replace faulty parts


5. Display Screen Shows Garbled Text or Abnormal Image

  • Possible Causes

    • Software conflict or corrupted firmware

    • Signal cable interference or damage

  • Remedies

    • Restart system or ECM

    • Inspect signal cables, replace if necessary

    • Upgrade display firmware


Maintenance and Prevention

  1. Keep the display screen clean, avoid dust or hydraulic oil contamination.

  2. Regularly check power supply and fuses to prevent voltage-related damage.

  3. Inspect connectors and wiring for looseness, oxidation, or damage.

  4. Perform software updates and backups, ensure display screen and ECM versions match.

  5. Handle screen carefully, avoid pressing too hard on buttons or touchscreen.

Pub Time : 2025-09-17 17:21:17 >> News list
Contact Details
Guangzhou Anto Machinery Parts Co.,Ltd.

Contact Person: Mr. Paul

Tel: 0086-15920526889

Fax: +86-20-89855265

Send your inquiry directly to us (0 / 3000)